NEOTEX Primary Colour

1 Gallon

Catalogue

Technical data sheet

  • Features
  • Surface preparation
  • Coating system
NEOTEX (Primary colour) provide good adhesion and long-lasting durability. It is suitable for the decoration and protection of all exterior & interior on Masonry, primed plaster, concrete, concrete blocks, brickwork, cement render, ceilings, gypsum, and wood surfaces. Good algae resistance, no lead, and mercury added.


  • Provides beautiful primary colours suitable for mixing with acrylic emulsion
  • Excellent adhesion
  • Anti-fungus and algae
  • Free from lead and mercury

Number

NT1520 Yellow, NT1530 Black, NT1540 Green, NT1550 Red, NT1560 Oak, NT1570 Navy blue
New surfaces Allow adequate time for the surface to dry out completely. The surface must be free from efflorescence. Brush down or scrape off any loose material and cement splashes.
Previously painted surfaces If previously paintwork is still in good condition washing down with clean water or brushing to remove dust and dirt. Powdery and chalky surfaces must be scrubbed and cleaned with water. Fungus and Mildew growth must be clean off with hypochlorite solution and allow for drying out at least 2-3 days.
Surfaces Primer Top Coat Dilution
New surfaces Apply one 1-2 coat of NEOTEX Acrylic Alkali Resisting Primer
NT 2050		 NEOTEX
(2 Coats)		 Clean water 10%
Previously painted surfaces Apply 1-2 coat of NOC Contact Primer NO 2011 (Water-base)
or NO 2015 (Solvent-base) or apply until no chalking
back