Hato Acrylic

5 Gallon, 1 Gallon

Technical data sheet

  • Features
  • Surface preparation
  • Coating system
HATO ACRYLIC for interior made with 100% pure acrylic emulsion. Good adhesion and long-lasting durability. It is suitable for the decoration and protection of interior on Masonry, primed plaster, concrete, concrete blocks, brickwork, cement render, ceilings, gypsum, and wood surfaces. Good algae resistance, no lead and mercury added.

  • 100% Pure acrylic emulsion
  • Provides for excellent hide and coverage for fewer coats
  • Excellent adhesion
  • Anti-fungus and algae
  • Free from lead and mercury



Fresh concrete Allow the surfaces dry at least 2 days in case of speedy work. The surface must be clean and free from dirt, grease, oil, wax, salt, and other contaminants.
New surfaces Allow adequate time for the surface to dry out completely. The surface must be free from efflorescence. Brush down or scrape off any loose material and cement splashes.
Previously painted surfaces If previously paintwork is still in good condition washing down with clean water or brushing to remove dust and dirt. Powdery and chalky surfaces must be scrubbed and cleaned with water. Fungus and Mildew growth must be clean off with hypochlorite solution and allow for drying out at least 2-3 days.
Surfaces Primer Top Coat Dilution
Fresh concrete Apply 1-2 coats of Hato Super Primer All in one
HA2038 (Water-based)		 Hato Acrylic
(2 Coats)


 Clean water 10%
New surfaces Apply one 1-2 coat of HATO Acrylic Alkali Resisting Primer
HA 2030
Previously painted surfaces Apply 1-2 coat of HATO Contact Primer HA 2033 (Water-base)
or HA 2035 (Solvent-base) or apply until no chalking
back