NOC Emulsion Paint For brick

NO3105
1 Gallon

Catalogue

Technical data sheet

  • Features
  • Surface preparation
  • Coating system
NOC is emulsion Paint formulated with fungus and mould resistance with no lead and mercury added. It is ideal for the protection and decoration for interior and exterior masonry substrates such as plaster, concrete, brick, gypsum board. Good adhesion. Good algae resistance, no lead and mercury added.


  • High hiding power
  • Smooth film
  • Good adhesion.
  • Anti-efflorescence and excellent alkali resistance
  • Weathers resistance
  • Anti-fungus and algae
New surfaces Allow adequate time for the surface to dry out completely. The surface must be free from efflorescence. Brush down or scrape off any loose material and cement splashes.
Previously painted surfaces If previously paintwork is still in good condition washing down with clean water or brushing to remove dust and dirt. Powdery and chalky surfaces must be scrubbed and cleaned with water. Fungus and Mildew growth must be clean off with hypochlorite solution and allow for drying out at least 2-3 days.
Surfaces Primer Top Coat Dilution
New surfaces Apply 1-2 coats of NOC Super Primer Two in one
NO2012 (Water-based)		 NOC
(2 Coats)		 Clean water 10%
Previously painted surfaces Apply 1-2 coat of NOC Contact Primer NO 2011 (Water-base)
or NO 2015 (Solvent-base) or apply until no chalking
back