Hato Shield Ceiling

9198 (ขาว) 9199 (เทา)
5 Gallon, 2.5 Gallon, 1 Gallon

Technical data sheet

  • Features
  • Surface preparation
  • Coating system
Hato Shield for Ceiling is the high quality of 100% acrylic emulsion. It is special for ceiling applications on plaster or gypsum board ceiling. Matt finishing is designed to conceal ceiling joints by reducing reflection on film finishing in order to provide smooth seamless ceiling surfaces and excellent adhesion. Anti-fungus and algae. Free from lead and mercury. It is ideal for application to gypsum on the ceiling.

  • 100% Pure acrylic latex with premium grade pigments
  • Non-reflective appearance to help make surfaces appear smoother with excellent hiding capability
  • Provides for extreme hide and coverage for fewer coats
  • Provide smooth seamless ceiling surfaces and excellent adhesion
  • Anti-fungus and algae
  • Low VOCs
  • Free from lead and mercury

Number 

  • 9198 (White)
  • 9199 (Grey)
New surfaces The substrate must be free from efflorescence, oil, grease, mildew. Brush down or scrape off any loose material and cement splashes.
Previously painted surfaces Powdery and chalky surfaces must be scrubbed and cleaned with water. Fungus and Mildew growth must be clean off with hypochlorite solution and allow for drying out at least 2-3 days.
Surfaces Primer Top Coat Dilution
New surfaces Apply 1-2 coats of Hato Super Primer All in one
HA2038 (Water-based)		 Hato Shield
Ceiling
(2 Coats)

 Clean water 10%
Previously painted surfaces
back