Hato Paint remover

B100
1 Gallon, 1/4 Gallon

Technical data sheet

  • Features
  • Surface preparation
  • Coating system
Hato Heavy Bodied Paint Remover is an extremely strong stripper that effectively removes paint, varnish, lacquer, shellac, epoxy, urethane, latex or any synthetic coating.  The remover liquid would infiltrate through the paint layers until they are skinned off without damage the material of the base surface. It can be used on wood, metal, concrete and masonry. 


  • Fast and easy paint removal.
  • Able to remove the paint regardless of any surfaces.
  • Causes no damage to the material of the base surface.
The surface must be completely dry and free from dust and grease.
Always wear protective gloves and work in an airy area.


  • Wear chemical-resistant gloves and chemical splash goggles.
  • Pour into a metal container and apply with a paintbrush to a small area. Brush in one direction only. Leave the area and let the stripper do the work.
  • After 15 minutes, tests scrape a small area to see if finish is ready for removal. Remove loosened finish by gently scraping in direction of wood grain with a plastic stripping tool. A toothbrush, toothpick or stripping brush will help remove old finish buried in recesses. Multiple coats or stubborn finishes may require repeat application.
  • Use a clean abrasive pad dipped in After Wash or Odorless Mineral Spirits to loosen remaining finish and remove any residue. Surface should be completely clean and dry before refinishing.
back