New surfaces | Surfaces must be dry and free from dirt, grease and other contaminants. Smoothen surface with sandpaper then clean off and dry. |
Previously painted surfaces | Polish the surface with sandpaper to enhance better adhesion. Chalky or peeling surface must be thoroughly cleaned with water and leave completely dried. |
Metal | Metal must be dry and free from dirt, grease and other contaminants. Ferrous substrate should be sanded or wire-brushed to remove mill scales and rust then clean off and dry. |
Surfaces | Primer (1-2 Coat) | Top Coat | Dilution |
Concrete Cement Masonry Gypsum Tile Plaste |
AG-11, AG-22, AG-33 Diluted with Clean water 10-20% |
Hato Gold (2 Coats) |
Brush: Diluted with Hato TG-04 or Acrylic Thinner 10-20% Spray Gun: Diluted with Hato TG-04 or Acrylic Thinner 1 GL: 1.5 GL or 150% |
Brass Iron Glass Alloy Stainless steel Resin Fiberglass Ceramic Wood Aluminum |
G-112, G-115, G-116, G-118 Diluted with Hato TG-04 or Acrylic Thinner Brush 10-20% Spray Gun 1 GL : 1.5 GL or 150% |
||
MG-111 To apply on oil paint diluted with turpentine |