Hato Lacquer

5 Gallon, 1 Gallon, 1/4 Gallon

Technical data sheet

  • Features
  • Surface preparation
  • Coating system
HATO Clear Lacquer is formulated from high-quality Nitro-Cellulose. It is suitable for the interior wood application. Paint film is fast-drying, gives high performance for decoration, high endurance quality, high gloss and highly adhesive with real wood and plywood with texture/grain. Non-mercuric and non-leaded paints.

  • High concentration & Mixed with thinner to give high coverage area
  • Fast-drying & Gloss finishing
  • Flexible film, Anti-scratch
  • Transparent film & Highlighting wood texture/grain

Number

HA2200 Hi-Gloss, HA2244 Matt

New Surfaces Use sandpaper to sand the wood surface until smooth
Fill all wood crack and hole by filler
Sand again until the smooth surface is obtained
The surfaces must be clean and free of dirt, grease, oil, wax, salt, and other contaminants
Old Surfaces Loose material must be removed by stiff brush
The surfaces must be clean and free of dirt, wax, salt, old paint, and other contaminants
Hato Lacquer Primer Top Coat Dilution
Hi-Gloss
HA2200		 Apply CAMEL Sanding Sealer
(CA3068) 1-2 Coat		 Apply 2-3 coats of Hato Lacquer (Hi-Gloss)
Flash off time between coat 5-10 minutes		 Brush:
Diluted with Thinner 10%
 Spray Gun:
Diluted with Thinner 1 GL: 1.5GL
Matt
HH2244		 Apply Hato Clear Lacquer
(HA2200) 2-3 coats		 Apply 2-3 coats of Hato Lacquer (Matt)
Flash off time between coat 5-10 minutes
back