NOC Acrylic Primary Colour

4 Ounce

Technical data sheet

  • Features
  • Surface preparation
  • Coating system
NOC ACRYLIC (Primary colour) made with 100% pure acrylic emulsion. Good adhesion and long-lasting durability. It is suitable for the decoration and protection of all exterior & interior on Masonry, primed plaster, concrete, concrete blocks, brickwork, cement render, ceilings, gypsum, and wood surfaces. Good algae resistance, no lead, and mercury added.

  • 100% Pure acrylic emulsion
  • Provides beautiful primary colours suitable for mixing with acrylic emulsion
  • Anti-fungus and algae
  • Free from lead and mercury

Number

BL Black, BU Navy blue, GR Green, RE Red, YB Dark yellow, YW Yellow
New surfaces Allow adequate time for the surface to dry out completely. The surface must be free from efflorescence. Brush down or scrape off any loose material and cement splashes.
Previously painted surfaces If previously paintwork is still in good condition washing down with clean water or brushing to remove dust and dirt. Powdery and chalky surfaces must be scrubbed and cleaned with water. Fungus and Mildew growth must be clean off with hypochlorite solution and allow for drying out at least 2-3 days.
Surfaces Primer Top Coat Dilution
New surfaces Apply 1-2 coats of NOC Super Primer TWO in one
NO2012 (Water-based)		 NOC
(2 Coats)		 Clean water 10%
Previously painted surfaces Apply 1-2 coat of NOC Contact Primer NO 2011 (Water-base)
or NO 2015 (Solvent-base) or apply until no chalking
back