Surfaces | Surface Preparation |
Metal | Metal must be dry and free from dirt, grease and other contaminants. Ferrous substrate should be sanded or wire-brushed to remove mill scales and rust then clean off and dry. |
Concrete Cement Masonry Gypsum Wood |
Surfaces must be dry and free from dirt, grease and other contaminants. Smoothen surface with sandpaper then clean off and dry. |
Primer | Dilution |
Apply 1 coat with Hato Polyguard Epoxy Enamel (2K) Dilution ratio PART A : PART B 4 : 1 by Volume Mixing and Stir until the mixture is homogeneous. Leave 10-15 minutes before application. Use within 8 hours after mixing PART A with PART B |
Diluted with Hato Polyguard Epoxy Enamel Thinner (EPT710) Brush: 10-20% Spray gun: 100-150% by Volume |