| |
 |
 |
Descriptions NOC Synthetic Enamel is made from special quality alkyd resin and light-fasted pigments. There is excellent outdoor durability for the tropical climate. They also impart scratch resistance and excellent adhesion. |
| |
|
|
Uses It is most suitable for the applications of woods, cement, properly sealed concrete, metals and primed steel surfaces. |
| |
|
|
|
| |
| Physical properties |
Type
|
Alkyd resin |
Texture
|
Gloss |
| Color |
According to the Color card |
Specific gravity
|
0.91 – 1.10 |
Spreading rate
|
40 – 50 sq.m. / U.S. gallon / Coat |
Dry film thickness
|
30 – 35 microns |
Drying time
|
1 - 2 hours |
| Recoat |
18-20 hours |
Diluted
|
White Spirit 10-15% by volume |
| Packing |
5 U.S. gallon, 1 U.S. gallon, 1/4 U.S. gallon |
|
| |
| Surface Preparation |
Surface must be through clean, free from oil, rust, millscale, loose old paint, dirt, grease or waxy contaminant. |
|
| |
| Prime the surface |
| Concrete or masonry |
prime with 1-2 coats of Hato Acrylic Alkali Resisting Primer HA 2030 |
| Metal substrate |
prime with 1–2 coats of Hato Red oxide Primer N–334 |
| Wooden surface |
prime with 1–2 coats of Hato Undercoat White N – 331 |
|
| |
| Top coat |
2 coats of NOC Synthetic Enamel |
|
| |
| Application |
| Brush, Roller or Spray Gun |
|
| |
 Download Technical Data Sheet 68 kb. |
| |
